Table of Contents
Advertisement
2.0 Total have 28
buttons
2.0.1 ENTER
2.0.1.1 Press the button to enter the enactment status and confirm the current data.
2.0.2 START/STOP
2.0.2.1
When the treadmill is not running, press the button to start the computer and all the data will
start to count.
2.0.2.2
When the treadmill is running, press the button then the computer will stop the
count and the treadmill stops.
2.0.2.3 Under the USER program edit status,
2.0.3 SELECT
2.0.3.1 When the treadmill is not running, it is to choose the exercise mode (Time, Distance, Calories)
program（P1—P10，U1---U3）
2.0.3.2 When the treadmill is running, press the button can change the display SPEED program
figure and INCL program figure.
2.0.4 POWER
2.0.4.1 Computer power switch, when you close up the power, the treadmill
be display 0.
2.0.5 INCLINE UP/DOWN & handlebar button*2
2.0.5.1 When the treadmill is not running, it can adjust the enactment value to increase and decrease
function.
2.0.5.1 When the treadmill is running, it can adjust the incline up or incline down.
2.0.6 SPEED FAST/SLOW & handlebar button*2
2.0.6.1 When the treadmill is not running, it can adjust the enactment value to increase and decrease
function.
2.0.6.1 When the treadmill is running, it can adjust the speed fast and speed slow.
2.0.7 INCLINE shortcut
2.0.7.1 When the treadmill is running, it can set up the incline quickly.
2.0.7.2 Under the USER program edit status, it can edit the incline quickly.
CHIEF
in the computer and 4
key*10
buttons
in the handlebar.
pressing
the button is equal to ENTER
- 11 -
function.
stops
and all the
data
will
Advertisement
Table of Contents
