Assembly Steps - LifeSpan dominator Owner's Manual

WRENCH W/SCREW DRIVER: 13*15 1 pcs
DOMINATOR

ASSEMBLY STEPS

Step 1：
1. Connect the computer wires on the left
and right handlebar assembly (2&3) and
with bolts M8*52 (22) & flat washer (38) to
tighten the
assembly and computer.
2. To lock the left and right outside plastic
cover with screw ST4.2*12 (34).
Step 2：
3. Connect the fixed rail tube (4) with the
bolts M8*26 (19), the bolts M8*52 (22) and
flat washer (42).
4. Insert left upright (5) & right upright (6)
into main frame. Connect them with the bolts
M10*25 (20) and flat washer (42).
CAUTION:
A. Please don't damage the wires in the
process.
B. Please don't tighten ALL BOLTS before
STEP (3).
Step 3：
5. Connect the computer right cable
between computer frame and right upright.
6. Insert computer frame into left upright
and right upright. Connect them with the
bolts M10*25 (20) and flat washer (42).
CAUTION: Tighten all the bolts again.
5
- -
left and right handlebar