Valor 1400IN Installation & Owner's Manual page 47

7. Assemble the heatshield to the upper panel as
indicated (5 screws).
8. Install the upper panel as indicated (3 screws).
Installation
9. Slide the appliance into the framing and fi x it to the
studs on each side (6 fi xing points per side).
10. Set aside the side doors, removable panel and
barrier screen to install later when the appliance's
set-up and wall fi nish application are completed.
11. Continue the installation of the heater as indicated
in this manual.
QUALIFIED
INSTALLER
47