The 1435 trim is intended to be used on Valor heaters Note: Mounting of this trim allows for non-combustible models 1400. Mounting of the 1435 does not affect material up to 3/4”...
Installation 3. Slide the removable panel in the clip on the horizontal supports on each side and push it in until 1. On completion of fi replace installation, screw the fl ush with the front trim. linerbox bracket to top face of fi rebox with 4 screws. 2.
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication. Designed and Manufactured by / for Miles Industries Ltd. 190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1 Tel. 604-984-3496 Fax 604-984-0246 www.valorfi replaces.com...
être installé pour la protection des enfants et des personnes à risques. La Bordure à trois côtés 1435 est conçue pour être Note : L’installation de cette bordure permet un fi ni installée sur les foyers Valor 1400. L’installation de incombustible jusqu’à...
Page 5
Installation 3. Insérez le panneau amovible sous les attaches des supports horizontaux des côtés et poussez le 1. Une fois le foyer installé, fi xez le support de caisse panneau jusqu’à ce qu’il soit égal à la surface de la à...
7. Installez le pare-étincelles. Les onglets du bas sont Entretien posés sur le bord du couvercle amovible et le pare- AVERTISSEMENT AVERTISSEMENT étincelles est maintenu en place par des aimants. a. Posez les onglets du bas sur le bord du NE TOUCHEZ PAS L’ÉCRAN PARE-ÉTINCELLES NE TOUCHEZ PAS L’ÉCRAN PARE-ÉTINCELLES couvercle amovible.