Valor 1400IN Installation & Owner's Manual page 46

QUALIFIED
INSTALLER
Installation
1. Unpack the 1430 kit checking that you have all the
pieces on hand.
Upper panel
Heatshield
LH side
panel
Side
stand-
off
Removable
panel
Kit content
2. On the top of the appliance's case in front of the
stand-offs, remove the positioning brackets (2
screws each); they are not used with this kit.
3. On the sides of the appliance case, install the side
stand-offs (2 screws each).
46
Upper
panel
support
LH side
door
Side
stand-
off
RH side
door
Lower panel
RH
side
panel
Barrier
screen
Installation
4. Fit the upper panel support to the top of the
appliance's case as indicated (5 screws).
5. At the bottom of the appliance case, install the lower
panel provided with the kit, as indicated (3 nuts).
6. On the appliance, install the side panels as
indicated (3 screws per side).