Install Liners - Valor 1400IN Installation & Owner's Manual

Install Liners

The following guidelines apply for all liners with the
exception of the 1470RGL—Refl ective Glass Liners;
the instructions are provided with the kit.
1. Inside the fi rebox, on the top of each side, release
the screw of the side panel anchors if necessary so
they can rotate freely (one per side).
2. Insert the bottom of one of
the side liner panel between
the burner and the side wall
and rotate it slightly to insert
it totally inside the fi rebox.
Push it gently against the
side wall. Rotate the side
panel anchor to hold the
panel in place.
3. Place the rear panel against the back of the fi rebox
behind the rail retainers at bottom and behind the
side panel already installed.
Note: If you are installing the optional 1405RGL—
Refl ective Glass liner panel (with 1425FBL—Fluted
Black Liners or 1460PBL—Black Liners),
place the refl ective panel, smooth side visible, in
front of the rear ceramic panel, held in place as well
by the bottom rail retainers.
Installation
4. Insert the top panel, beveled edge towards the back
of the fi rebox, on top of the side and rear panels.
5. Insert the bottom of the
other side liner panel
between the burner and
the side wall and rotate
it slightly to insert it
totally inside the fi rebox.
Push it gently against
the side wall. Rotate the
side panel anchor to
hold the panel in place.
6. Slide the top across the top of the other panel to
rest on both side panels and rear panel.
top
underside
(fi re side)
rear ceramic
panel
without 1405RGL—
Refl ective Panel
QUALIFIED
INSTALLER
top
underside
(fi re side)
refl ective
panel
(optional)
rear ceramic
panel
with 1405RGL—
Refl ective Panel
53