Valor 1430FFK Installation Instructions Manual

CSA approved for use with Valor Model 1400 Heaters ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
The 1430FFK Fixed Framing Kit installs to the Valor
1400 appliance during the framing stage and the
appliance's position is fi xed in the framing. Wall fi nishes
are then applied over top of the fl anges and butted up
to the frame of the 1430.
This kit is not intended and cannot be installed with
an H6 trim or any other trim .
See appliance installation manual for more
information about fi nishing around this kit.
4004907-04
© Copyright Miles Industries Ltd., 2016.
H6 S
1430FFK Fixed Framing Kit

Installation Instructions

HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
45-5/8" (1158 mm)
41-3/4" (1061 mm)
ERIES
Note: This kit must be installed
by a qualifi ed installer, service
agency or gas supplier at the
time of the heater installation.
These instructions are to be used
in conjunction with the fi replace
main installation instructions.
1-1/8"
(29 mm)
Upper panel
Stand-off
LH panel
LH door
Barrier screen
Overview
INSTALLE R
L e a v e t h i s m a n u a l
w i t h t h e a p p l i a n c e .
CONSUM E R
Retain this manual
for future reference.
1400 engine
Stand-off
RH panel
RH door
Lower panel
Removable panel