Table of Contents
Advertisement
A.
Use: If you want to use CHAP Authentication, you can check the use box
B.
User Name: You can enter iSCSI authentication user name
C. User Password: You can enter iSCSI authentication user password
4) Session1, Session2
You can mount multiple iSCSI sessions from the same target address.
A.
Target Nodes
If you click Target Node Setup button, it will display target node name and you can select
only one target node name.
If it does not display any target node name, you must check NVR network or iSCSI
device network. If error popup window appears, you must check iSCSI setting
information if entered correctly.
B.
Mount, Unmout
By using above information, you can mount or unmount.
The file system can be mounted or unmounted by pressing the toggle button labeled
Mount
You can record if there are no errors in normal mount.
If you try boot with no disk and you mount the iSCSI, it will automatically reboot.
If the iSCSI file system is different from the NVR file system after the mount, it will automatically
format.
You cannot change the IP address when the iSCSI is already mounted. If you want to change the
IP address of the NVR, you must unmount.
73
Advertisement
Table of Contents
