Table of Contents
Advertisement
For the camera Address should be as:
Ex)http://192.168.10.110/onvif/device_service. The colored part should be entered with the correct IP
camera Address. In this case, the IP camera must support Onvif.
By clicking the IP tab, you will be able to edit your IP camera registration. Once you have made the
changes, click the TEST button to see if it was successful.
When all IP cameras are registered and ready for use, you can always go back and delete the
cameras.
Simply by clicking the delete button, a window will appear in the middle of the page asking if you would
like to delete. Click OK to delete the specific camera channel or all.
28
Advertisement
Table of Contents
