System Controller / Printer Device; Pos / Atm Device - Advanced Technology Video NVR4P Instruction Manual

3.3.5. System Controller / Printer Device

You can set the RS-485/232 communicator for the use of PTZ Camera and UBS system keyboards
with the NVR.
1) Set the values of each communication setup of the remote device.
2) Baud rate: Baud rate settings of the NVR, PTZ camera and system keyboard should be matched
for proper operations.
3) Make sure to match IDs of the NVR and System Keyboard and click <OK>.
4) Remote Control: You can select to have it ON or OFF and enter ID
5) Printer: You can select whether the printer is USB or Network.
*If the PTZ protocol is ONVIF, then RS485 is not necessary. Please refer to pages in this manual for
System Keyboard details

3.3.6. POS / ATM Device

You can set properties of POS devices connected to the NVR.
49