Table of Contents
Advertisement
3.1.5. Sequence / Event Display
The NVR can display each live video channel in full screen (or a group of channels) in sequence mode.
Select the interval, Channel Setup and Duration.
SEQUENCE:
1)
Interval: You may select OFF position or 30 sec maximum.
2)
Single Mode: By clicking the Channel Setup, you can select individual channel or all.
If the user wants to use Auto Sequence mode, click the right-click to select the Auto Sequence under
the Screen mode.
EVENT DISPLAY: When viewing live and an event occurs, an event window will pop up showing all
channels that are set in event setting.
- Duration: You may select OFF or time interval setting.
33
Advertisement
Table of Contents
