Table of Contents
Advertisement
Once the Video Analysis is set and complete, you will be able to view events if an action has taken
place. You'll be able to view in Search Menu under Video Analysis. However the Video Analysis
function is available only for the video analysis supporting camera.
3.4. System Setup
This menu helps you to configure NVR for basic operation. You can set the current time for your area,
network parameters, and password for security purposes.
3.4.1. Date/Time Setup
You can set the current date and time manually.
1) Auto Time Set: Time Sync. By using Time Server. The default of Auto Time Sync. Is
time1.google.com. For using the Auto time sync, the NVR should be connected to the internet.
2) Date: Sets the date that will appear on the screen. You can select the date format.
2) Time: Sets the time and its format that will appear on the Screen. Select either one from <24
Hours or 12 Hours (AM/PM)>
3) Time Zone: Sets the time zone of your area based on the Greenwich Mean Time (GMT)
- GMT is a standard World Time and the basis of world time zones.
4) DST: Set up Daylight Saving Time with its period to make the time earlier than the GMT of its time
51
Advertisement
Table of Contents
