Table of Contents
Advertisement
setting.
5) When the alarm is generated on the scheduled time, you can stop the alarm by click the Stop
Alarm in right click menu or launcher.
6) When the Alarm Schedule setup is complete, click <OK>.
3.3.4. PTZ
NVR supports Pan, Tilt, Zoom and Focus control for PTZ cameras. The NVR supports most industrial
common protocols. Once the IP PTZ camera is connected, the system scans the PTZ camera to
register to them automatically.
1) ID: You can select an ID number (0-255) for each PTZ camera.
2) Protocol: For direct control of the IP camera, select ONVIF protocol.
3) Speed: Select the speed of camera movement (1-5). The higher number indicates faster speed.
4) When the PTZ setup is complete, click <OK>
* For the detail information of PTZ operation, please refer to the PTZ Control Section of this manual
herein.
48
Advertisement
Table of Contents
