Table of Contents
Advertisement
[3/5] Connection Mode setup
The user can set the Network and IP camera connection mode properly according to the network
connection.
** For detailed information, please refer to the 3.5. Network Setup page of this manual
[4/5] IP Camera Registration
The user can check the IP camera listing and register the desired IP cameras automatically or
manually by click the Auto/Manual button.
Quick search: the user can search the IP cameras connected to the network and system quickly. In
this case, the user must enter the camera ID and Password one by one.
Detail search: if the user selects the Detail search, it will take more time to search all the cameras
comparing to quick search. The system checks all IP camera IDs and Passwords automatically. The
user needs not to enter the IP camera ID and password separately. The registered camera can be
detected automatically from the NVR, so the user needs not to enter the ID and PW of IP camera
separately.
Manual add: if the user wants to add the remote cameras manually, firstly the user check the IP
camera address to register to the system. The IP camera must support Onvif and enter the full Onvif
IP camera address. Ex. http://192.168.10.110/onvif/device_service.
* For detailed information, please refer to the IP camera registration page of this manual
18
Advertisement
Table of Contents
