Table of Contents
Advertisement
Auto/Manual: By clicking this button, you will be able to select which channel(s) to register
automatically. If unselected/un-checked (mark V), then that channel will not register automatically. You
can select all channels or specific channel(s).
**Only IP cameras that support Zero Config. will be able to connect automatically.
Once you have clicked the ADD button to click the "Search" button, a list of IP cameras will appear on
the screen that has been detected automatically. To select the desired IP camera, simply click the
"Registration" tab.
And then IP Camera Registration window will appear. Enter the camera ID and PW to click the TEST
button to see if the connection is successful. If all the information is correct, you will see "SUCCESS"
indicating that the camera is ready for operation. If the connection has failed, double check the
information entered. Once everything is successful, then click the OK button.
When Search button is clicked, it will search all the registered IP cameras again. If you would like to
add remote site IP camera, click the "Manual Add" tab.
A window will appear to enter IP camera information. Enter the camera Address, ID and PW to click
the TEST button to see if the connection is successful. If it's successful, click the OK button.
27
Advertisement
Table of Contents
