Table of Contents
Advertisement
INSTALLING SYSTEM KEYBOARD WITH STANDALONE NVR SERIES
When user wants to connect with NVR, proceed as the following order.
1. Connect RS232 cable between RS-232 Port of NVR and RS232 of the Keyboard.
(This connection enables NVR control remotely from KBD controller)
2. How to setup the KBD controller.
A. Turn the Keyboard ON
B. Input password (Factory setting is 9999)
C. Open the menu of the KBD controller by pressing CTRL + MENU Key.
D. Set as below in Network menu.
Set Baud Rate
RS232
: 9600(2400~38400)
3. How to setup NVR
RS232
Baud Rate
9600(2400~38400)
Com Ports
RS232
:
Parity
None
136
DVR1
Data
Stop
8
1
Advertisement
Table of Contents
