Table of Contents
Advertisement
PoE Reset: will power ON/OFF of the camera automatically. When a RESET tab is clicked, a popup
window will appear to confirm your selection and then proceed.
3.1.3. IP Camera Setup
In this menu, you will be able to setup your IP camera to desired setting. By clicking the IP Camera
Setup tab, you will have five (5) different settings to work with.
-Profile, Resolution, FPS, Quality and GOP (Group of Pictures)
Click on the desired channel and then IP camera setup page will appear.
Profile: We recommend "Main" profile because it allows the most efficient coding of video. It reduces
the required network bandwidth for video. The only profiles that can be enabled are ones supported by
the camera. If you cannot enable it, then the camera does not support that particular profile.
Capture: It will display capture resolution supported by the camera. Once the Capture tab is clicked, a
window will appear to set.
Resolution: It will display resolution options supported by the camera. Once the Resolution tab is
clicked, a window will appear in the middle of the page. Scroll down on the Resolution bar and select
desired resolution setting.
29
Advertisement
Table of Contents
