Table of Contents
Advertisement
- Have a higher/newer version of firmware software in a USB memory stick.
- Insert a USB memory stick to the USB port on the NVR.
- Available firmware file will be shown on the screen. Select the right firmware file.
- Click Upgrade button.
- NVR will reboot automatically after update. Please wait until NVR has rebooted automatically.
2) Import Configuration: Import and copy the NVR configuration file from a USB memory stick. If the
"Include Network Setting (IP Camera)" is selected, all IP configurations can be also copied to the
other NVR.
3) Export Configuration: Export current NVR configuration to USB memory stick. You can import this
file from other NVR(s) and clone the configuration from other NVR(s).
4) Reset: You can restore all configurations including the IP camera and network settings to factory
default values by check-marking "Include Network Settings (IP Camera)" in the box. (Except
current time)
3.4.4. Log Information
You can browse system and events logs. System Log shows log and timestamp on every system start,
system shutdown and any changes on system settings. Event log will show all events that occurred on
the log list. You can select by type or channel.
You can retrieve log information by calendar by clicking the calendar icon. For those dates that have
data, there will be a small checkmark next to the date.
53
Advertisement
Table of Contents
