Table of Contents
Advertisement
3.1. Video/Audio Setup
There are 5 sub menus under Video/Audio. To exit to main menu, press MENU key again (or right click
on the mouse).
3.1.1. Camera
In the Camera menu, you will be able to set up your camera to a desired setting. Click the Camera
menu and it will route you to a Camera setup page.
1) VIDEO: You may select the video ON, OFF, COVERT 1 or COVERT 2.
ON: Pictures/Images and icons will appear on screen as normal.
OFF: When the video is switched to OFF, there is no action taken, (no images / pictures,
recordings icon, etc.) but only camera title will be displayed on the screen.
COVERT 1: Video/pictures will not appear and will be blank/black, but icons and camera title will
appear. Despite being in covert, the NVR will continue to record.
COVERT 2: In this mode, the screen will be completely blank including icon, camera names, etc.
but will continue to record.
2) AUDIO: You may select the audio ON or OFF position. If you want to activate the Audio function,
firstly you should select Audio On for the desired cameras in the Camera Menu and then go to IP
Camera Setup menu to set the Audio section of the camera as G.711 position.
3) TITLE: Create your own title for each camera connected to the NVR by using the virtual keyboard
(up to 15 characters). If you skip this setup, camera # will be displayed on the screen.
25
Advertisement
Table of Contents
