Table of Contents
Advertisement
Dashboard Setup by New Account:
For Dashboard setup, you'll first need to enter important information and register. Scroll down and
select New Account. Once you have selected the New Account, you'll need to enter your ID and
Password.
To enter your ID and Password, use the virtual keyboard that's provided.
After you have selected and entered your ID and Password, click on to the "Register/Add a new
device" tab to register.
If the entered ID and Password are approved, you will receive "ID Approved" popup window in the
middle of the screen. It will also indicate at the bottom of page, Dashboard Registration: SUCCESS. If
the ID and Password is not accepted, then it will show as "FAIL" and you will have to re-enter your ID
and Password.
Dashboard Setup by Existing Account:
The user can manag and control the mutiful NVRs with single ID and Password by web browser. If the
user wants to control more than 2 NVRs with single ID and PW by web browser, the Dashboard ID and
PW for the NVRs should be same.
3.5.4.2. Dashboard Starting
To start your Dashboard, you will need to type in:
http://securityddns.com/dashbord
in the browser address bar. After entering , click the enter button and
Welcome To Dashboard page will appear.
To gain access, enter your Username and Password. Your username/ID and Password will be same
as the one that you entered when you first registered on Dashboard Setup page. After it has been
entered, click the Login button for full access.
64
Advertisement
Table of Contents
