Navigating To Different Channels By Using The Remote Control - Advanced Technology Video NVR4P Instruction Manual

Navigating to different channels by using the remote control.

To navigate from one channel to another channel, you must first select the channel and it must be on a
single full screen view. By pressing the direction button on the remote control ▶, it will take you to the
next channel in sequential order.
If a channel is selected (has yellow border), you can use the remote control by using the arrow buttons
to navigate to individual channels. To select a channel using the remote control, press the enter button
and a yellow border will appear on that channel, (see above picture). After the channel has been
selected and by using the arrow buttons on the remote control, you can navigate to desired channels.
23