Record Setup; Policy - Advanced Technology Video NVR4P Instruction Manual

3.2. Record Setup

With this menu, you can set all parameters (see the picture as below) related to recording for each
camera independently. Use direction keys and ENTER button to select the camera (channel) and
change the setup value.

3.2.1. Policy

NVR can record a live video by manual, schedule, event (motion detection and/or external sensor) and
by network user's command. You can set the recording policy for each camera independently.
1) Manual (R) [ON / OFF]
ON: When turned ON, you can start recording manually by pressing a REC button on the
launcher (or by clicking REC icon on mouse menu). Press REC key again to stop recording.
OFF: Manual recording is disabled on selected camera(s).
2) Schedule (S) [ON / OFF]
ON: Schedule record enabled
OFF: Schedule record disabled on selected camera and NVR will not record by your schedule
setup. This will override schedule setup menu.
3) AUDIO [ON/OFF]: Allows user to turn audio record ON or OFF.
36