Table of Contents
Advertisement
KBD Controller Keys in USB (DVR/NVR-LIVE)
Function
Menu
Display Mode
PTZ
Enter
Full Screen and
Input Number
Zoom
Freeze
Auto Sequence
Mode
Alarm
Record
Joystick
POS Configuration
When the POS device transmits ASCII data, the NVR can record without any interface devices. (ex.,
AVE device – VSSI Pro) However if the POS device is sending data other than ASCII protocol, it is
recommended to use the AVE interface device.
For example, the AVE's VSSI –PRO device is point to point, (ASCII standard protocol) but if the user
would like to use multiple POS with the NVR, it is needed to use AVE's VSI –PRO Max (VSI-ADD)
interface. Further details, please refer to the VSI-Pro Max Networking as below and AVE's manual.
Point to Point POS configuration using ASCII protocol
Key Label
Macro
Enter the Quick Setup screen. You will need to enter the
administrator password to access the Quick Setup.
Pressing the button also closes the current menu or setup
dialog box.
Change the display mode to different split screen.
Control PTZ camera(s) connected to your DVR/NVR.
Select a highlighted item or completes an entry that you
have made
Displays selected camera in the full-Screen Mode and
enter the numbers in the login menu.
No.+
From Live display, select the desired channel and click the
Zoom In button to activate the Zoom Mode.
From Live Display, click the FRE button to activate the
Freeze Mode.
When in the Live Mode, clicking the SEQ button will display
another full live channel sequentially.
Will turn off the alarm
Toggle will start and stop the recording operation
Zoom control (proportional to position). Tilt control, Cursor
Up/Down in the menu, Pan control, Cursor Left/Right or
Page scroll in the menu.
IP camera
RS232
Descriptions
NVR
139
Monitor
Advertisement
Table of Contents
