Edge Covers L And R, Scanner Cover Support, And Damper - Brother DCP6690CW Service Manual

6.1.4 Edge Covers L and R, Scanner Cover Support, and Damper

(1) At the left end of the machine, remove the four screws from the edge cover L and lift it up
together with the scanner cover support and damper.
(2) At the right end of the machine, remove the three screws from the edge cover R and lift it
up.
Edge cover L
Scanner cover
support
(3) Slide the boss of the scanner cover support to the center of the scanner cover damper and
remove the damper from the support.
(4) Turn the scanner cover support to set in the edge cover L once. As shown below, lightly
pull the lock arm on the edge cover L outwards with a flat screwdriver and slide the scanner
cover support to the front to remove it.
Scanner cover support
Assembling Notes
• When mounting the edge cover L, first insert the front tab into the side cover L.
Scanner cover
damper
Tab
Cutout
Side cover L
(Front)
Taptite, bind B
Edge cover R
M4x12
Upper cover
Scanner cover damper
Boss
Lock arm
6-29
LT cover
(6_08)
Edge cover L
Scanner cover
support
(6_09)
Confidential