Paper Pull-In Idle Gear And Paper Pull-In Roller L - Brother DCP6690CW Service Manual

Paper pull-in idle gear and paper pull-in roller L

Apply a 3 mm diameter ball of grease (Molykote EM-30LP) to the lubrication point on the
paper pull-in idle gear as shown below. After applying the grease at the center of a gear teeth,
rotate the gear until the lubrication point is hidden by the adjacent gear, taking care not to touch
the paper pull-in rollers.
Apply a 1 mm diameter ball of grease (Molykote EM-30LP) to the lubrication points on the
paper pull-in roller L as shown below.
Paper pull-in roller R
Apply grease here.
Paper pull-in
gear
Paper pull-in idle gear
6-110
Apply grease here.
Paper pull-in roller L
Engine unit
(placed upside down)
Apply grease here.
(Front)
(6_87)
Confidential