How to Access the Target Component
• On the next page is a disassembly flowchart which helps you access the target components.
To remove the maintenance unit, first find it on the flowchart and note its section number
(Section 6.1.16
in this case). To access it, you need to remove all the parts above the
maintenance unit on the flowchart
6.1.15
in this case) before the unit itself can be removed.
• Unless otherwise specified, all parts should be replaced in the opposite order to which they
were removed to reassemble the machine.
(Sections
6.1.1, 6.1.4, 6.1.5, 6.1.7, 6.1.10, 6.1.14, and
6-4
Confidential