Lower Adf Chute - Brother DCP6690CW Service Manual

Lower ADF chute

(13) Cut off the cable tie that binds a bundle of harnesses (ADF motor harness and its grounding
wire, document sensor PCB harness, and document width sensor harness) to the document
cover.
(14) Remove the two screws from the lower ADF chute and take the lower ADF chute off the
document cover.
Docment cover
Cable tie
Grounding wire
ADF motor harness
Document sensor
PCB harness
Tsptite cup B M3X10
Document cover
Document width
sensor harness
6-20
Lower ADF chute
(6_21)
Confidential