Status Display; Warning Display - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

SDP-Eco1630 III USERS MANUAL

8.3 Status display

Status displays indicate the machine's current operation status.
Initializing
Start OK
Cleaning
Heating
Exposing
Recovery
Discharging

8.4 Warning display

Pump Check
Punch Dust Check
Rinse Tank Check
Message
Machine is being initialized.
Remote operation is ready.
Processor is being cleaned.
Processor is being heated.
Machine is exposing an image.
Machine is in recovery.
Plate is being discharged.
Message
This indicates that it is time to replace the pump, so
please contact the dealer where you purchased this
machine and request a pump replacement.
Press the
processing.
This indicates that the punch box is full of dust.
Open the plate setting cover and take out the punch box
to dispose of the dust.
Pressing the
Check the remaining amount of rinse water in the rinse
water replenishing bottle. Push the
message. Be sure to reset the software counter in the
machine. Open the front door, and then close it to reset
the counter. For detailed information, refer to section "6.7
Rinse".
Operation status
Warning contents
key to clear this display and continue
key resets the punch counter to "0".
- 68 -
key to delete the