Turning On The Power Switch; Initialization - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

SDP-Eco1630 III USERS MANUAL

4.2 Turning ON the power switch

Before you turn ON the power switch of the main unit, check the following
points.
1) Processing chemical has been properly supplied to the processor.
2) The front door and plate setting cover are securely closed and the covers
are properly mounted.
Caution In a SCSI, the power switch must be turned ON from the peripheral unit.
First, check that the power switch for the host computer (RIP computer) is
shut down. Then, turn ON the machine power switch.
Note
If any error is detected during initialization after turning ON the power switch, it is
immediately displayed.

4.3 Initialization

When the power switch to the SDP-Eco 1630 III is turned ON, the machine
performs an initialization sequence which includes a number of routines to
confirm that it is ready for normal operation. Checked items include:
- Internal setting check
- Plate mounting check
- Polygon mirror function check
- Waste chemical tank level check
- Activator (EAC) level check
- Stabilizer (EST) level check
- Home position check for each moving part
•
Panel display flow after machine startup
Initializing....
-
Note
process, by using the
-
The "Heating" window informs you if a heater has not yet reached the specified
temperature. ("P" signifies the process heater, and "R", the roller heater.)
Levels
Cleaning
You can cancel the operations after "Cleaning", during the sequence of this
Dryer H/L?
Heating
Start OK
key.
- 26 -
Cleaning