Handling Processing Chemicals - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

SDP-Eco1630 III USERS MANUAL

1.3 Handling processing chemicals

Warning
Cautions for use of processing chemicals
Caution
What to do in case of emergency
Caution
Cautions for handling waste chemicals
Caution
The SDP-Eco 1630 III uses processing chemicals to activate and
stabilize exposed plates. The processing chemicals used in this
machine are not generally dangerous to humans, but failure to use
them in the correct manner is dangerous. Be sure to handle all
processing chemicals with care.
Inflammation may occur if processing chemicals come in contact
with the eyes or skin, so be sure to wear protective gear (safety
goggles and rubber gloves) when handling the chemicals.
Keep out of reach of children.
If chemicals come in contact with the eyes, immediately rinse with
clean running water for at least 15 minutes. If the inflammation
persists, consult an eye specialist.
If chemicals come in contact with the skin, immediately rinse under
clean running water.
If chemicals are swallowed, immediately consult a physician.
Report the ingredients of the chemical or solution to the physician.
These chemicals have high COD and pH levels (especially the
activator) and cannot be disposed of by simply pouring them down
the drain. Please have processing chemicals removed by a
certified waste management specialist.
- 6 -
Chapter 1 On Safety