Replacing The Diffusion Sheet (Slm-Eac, Slm-Est) - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

- Before securing the washing tank, lift the near end of the tank and
Caution
- Securely tighten the set screws using a coin.
Left tray rail

7.7 Replacing the diffusion sheet (SLM-EAC, SLM-EST)

Processing
chemical supply
guide (SLM-EST)
its retainer as high up as possible
Slit
Processing
chemical supply
guide (SLM-EAC)
Processor rack
- 63 -
Chapter 7 Maintenance
19) Plug the removed hose back into
the tube connector.
20) Insert the back of the left tray rail
into the slit in the guide plate.
21) Secure the left tray rail with set
screws.
1) Remove the processing chemical
supply guides from the processor
rack.
2) Loosen the two set screws for
each processing chemical supply
guide to remove the diffusion
sheet.