Cleaning The Washing Tank - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

Groove
Bearing for a
roller

7.6 Cleaning the washing tank

Clean the washing tank every one month to prevent contamination with
slime or mold.
You must thoroughly read "1.3 Handling processing chemicals".
Caution
Processing
chemical
Drain port for SLM-EST
collection hole
Pin
Exit roller (lower)
- 59 -
Chapter 7 Maintenance
14) Attach the bearing for a roller to
the lower exit roller.
15) Install the lower exit roller by
slightly rotating it in such a
manner that the pin in the
coupling properly engages the
groove in the lower exit roller.
Note
If the groove in the lower exit
roller properly engages the
pin in the coupling, the lower
exit roller
counterclockwise.
16) Install the other necessary parts
reversing the order of steps you
followed when you removed
them.
1) Turn OFF the main power switch.
2) Lay out the maintenance mat.
3) Open the front door and remove
the replenisher bottle.
4) Insert the SLM-EST drain port in
the processing chemical collec-
tion hole (located in the upper
cover of the tank).
rotates only