Operation Panel - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

2.2 Operation panel

(1)
(1)
The operation mode, error messages, and setting values for various
parameters are displayed on this panel.
(2)
The power ON/OFF key is used to turn OFF the power after a processor
cleaning operation. This key is used for the usual ON/OFF operation.
(3)
The ON LINE lamp is lit during transmission or standby status between
the SDP-Eco 1630 III and host computer.
(4)
The LOADED lamp lights when a film is loaded and at its exposure
position.
(5)
The STOP key is used to interrupt the exposure of a plate. If the exposure
is interrupted, the plate will be cut and discharged. This key is also used
to cancel errors and to turn OFF the error buzzer.
(6)
MENU
The
Also it returns the menu to the upper level.
(7)
The SELECT key is used to move the cursor or change parameters.
NT.
(8)
The
commands.
(2)
(6)
Display panel
Power ON/OFF key
ON LINE lamp
LOADED lamp
Stop key (Reset)
key
key is used to switch the user's mode between remote and local.
MENU
Select key
key
NT.
key is used to enter parameters or to execute various
- 17 -
Chapter 2 Names of Machine Components and Parts
(4)
(3)
(7)
(5)
(8)