Warning Labels And Attachment Positions - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

SDP-Eco1630 III USERS MANUAL

1.2 Warning labels and attachment positions

Warning labels are attached to dangerous parts or areas of the machine. All
operators and maintenance personnel must follow the instructions written on
these labels.
- Do not remove or deface any of these warning labels.
- Labels must always be clearly visible without any obstacles shielding or
obscuring them.
- If a label is removed or defaced, replace it with a new warning label as
soon as possible. Please contact the dealer where you purchased this
machine for new labels.
•
Types of warning labels
(1) Caustic
agent
Contains processing
chemicals. Direct contact
with these chemicals due
to splashing or overflow
may result in skin.
irritation, blindness, or
burns.
(2) Hazardous
Moving
Section
Hands or fingers may get
caught.
(3) Caution
Sections marked with this
label contain functions or
components which could
cause personal injury.
Hazard
Always wear protective gear such as safety glasses,
rubber gloves, masks, and rubber aprons.
Read all instructions and warnings for processing
chemicals.
Hazard
Keep hands, fingers and the rest of the body away
during operation. Always turn OFF the main power
supply and the power switch on the machine before
approaching.
Hazard
Keep hands, fingers and the rest of the body away
from the machine while it is running. If you must
physically touch the machine, always turn the
power supply OFF beforehand.
Safe handling method
Safe handling method
Safe handling method
- 4 -
Chapter 1 On Safety