Chapter 6 User Menu; Plate Data - Mitsubishi SILVER DIGIPLATER SDP-ECO 1630 III User Manual

Chapter 6 User menu

It is possible to set values affecting the machine's operation state from the user
menu. Note that some settings from the host computer are given priority and
they will be automatically changed if the host computer resets them.
Refer to '5.2 Panel operation' for details on key operation.
Note

6.1 Plate data

The
< Plate Data >
loaded.
•
Data channel
The data channel stores the plate information. 10 different sets of plate
parameter data can be stored (from M0 to M9). The plate information consists
of plate type, plate width, remaining amount, and the set laser (depends on the
resolution for the respective plate type).
•
Plate type
You can only use the following three types of plates.
Panel display
•
Plate width
Each plate can be set to the following widths (displayed in mm).
command is used to enter information on the plate to be
Sample panel display
Data
Plate type
channel
M 1 F 1 7 5
F175
F100
R175
late width(mm)
Remaining
Plate width
amount
4 0 4 6 0 m
Plate model
SDP-FRm175
SDP-FR100
SDP-RR175
late width(inch)
- 41 -
Chapter 6 User menu
Remarks
Polyester base
t 0.175 mm
Polyester base
t 0.100 mm
Paper base
t 0.175 mm