To Change Ringing From 50 To 20 Hz; Reverse Cadence; Keypad Confirmation - Mitel 3000 Administrator's Manual

TO CHANGE RINGING FROM 50 TO 20 HZ

This option allows the ringing frequency to be changed from the default 50 Hz to 20 Hz on individual
extensions.
•
From the Programming extension, press the PROGRAM key.
•
Select "System Programming".
•
Enter the System Programming Password and select "Extensions".
•
Press the Scroll Down key ( ) until "20 Hz Ringing" is displayed.
•
Select "20 Hz Ringing".
•
Select the extensions required to ring at 20 Hz.
Press the speakerphone key to finish programming.
The default is that all extensions are set for 50 Hz ringing.

REVERSE CADENCE

The external and internal ringing cadences can be interchanged on an extension-by-extension basis.
•
From the Programming extension, press the PROGRAM key.
•
Select "System Programming".
•
Enter the System Programming Password and select "Extensions".
•
Press the Scroll Down key ( ) until "Reverse Cadence" is displayed
•
Select "Reverse Cadence".
•
Select the extensions that require the cadences changed.
Press the speakerphone key to finish programming.
By default the reverse cadence is "On", indicated by "♦".

KEYPAD CONFIRMATION

The Feature Phone provide confidence tones while digits are being dialed, this can be disabled on an
extension-by-extension basis.
•
From the Programming extension, press the PROGRAM key.
•
Select "System Programming".
•
Enter the System Programming password and select "Extensions".
•
Press the Scroll Down key ( ) until "Keypad Confirmation" is displayed.
•
Select "Keypad Confirmation".
•
Select the extensions that do not want confirmation tones.
Press the speakerphone key to finish programming.
107
Mitel 3000
Administrator's Manual