To Program an Extension for use with a Public Address Amplifier
An extension with a Public Address amplifier connected must first be programmed for use with a PA
amplifier.
•
From the programming extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until "System Programming" is displayed.
•
Select "System Programming".
•
Enter the System Programming Password and select "System".
•
Press the Scroll Down key ( ) until "PA Amplifier" is displayed.
•
Select "PA Amplifier".
•
Select "PA Equipped".
•
Select the extension to which PA system is connected.
Press the speakerphone key to finish programming.
Note: The extension that has been programmed as the Programming extension will not be displayed as an
option on the screen.
Note: The extension that has been programmed as the PA extension will be indicated by " " next to the
extension.
81
Mitel 3000
Administrator's Manual