Mitel 3000
Administrator's Manual
TO PROHIBIT TRUNK-TO-TRUNK CALLS ON AN
EXTENSION
You can prohibit individual extensions from activating External Forward, External Transfer and External
Conference. (These features set up so-called trunk-to-trunk calls).
•
From the Programming extension, press the PROGRAM key.
•
Press the Scroll Down key ( ) until "System Programming" is displayed.
•
Select "System Programming".
•
Enter the System Programming Password and select "Extensions".
•
Press the Scroll Down key ( ) until "External Diversion" is displayed and select.
•
Select "No Trunk-To-Trunk Calls".
•
Select the extensions to be denied this feature. Those extensions denied the feature are indicated by a
"♦".
Press the speakerphone key to finish programming.
TO MOVE A FAULTY EXTENSION
If an extension interface becomes faulty, you can swap its extension programming to a different extension.
Calls for the faulty extension will be routed to the new extension.
•
From the Programming extension, press the PROGRAM key.
•
Select "System Programming".
•
Enter the System Programming password and select "Extensions".
•
Press the Scroll Down key ( ) until "Port Swapping" is displayed.
•
Select "Port Swapping".
•
Select the faulty extension from the extension list.
•
Select the new extension from the extension list.
Press the speakerphone key to finish programming.
106