Using Remote Programming To Forward Calls; Using Remote Programming For Personal Call Routing - Mitel USER GUIDE 8662 User Manual

Using Remote Programming to Forward Calls

See "Manual Call Forwarding" on
To use Remote Programming to turn on Manual Call Forwarding:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial one of the following Call Forwarding feature codes:
6. Enter either an extension number or 8 followed by a telephone number.
To turn off Call Forwarding:

Using Remote Programming for Personal Call Routing

See "Using Personal Call Routing" on
Routing.
To use Remote Programming to enable Personal Call Routing:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 363 (Personal Call Routing On).
To use Remote Programming to disable Personal Call Routing:
Mitel ® 8662 IP Phone User Guide – Issue 13, September 2009
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
Dial 355, and then hang up.
•
Call your DISA number (provided by the system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
Follow steps 1. - 4. above, dial 362 (Personal Call Routing Off), and then hang up.
page 30 for more information about Manual Call Forwarding.
page 32 for more information about Personal Call
Call Features
Page 39