Programming Programmable Buttons - Mitel USER GUIDE 8662 User Manual

Ring Tone Selection
Station Monitor
Station Speed Dial
Station Speed Dial – Programming
Steal Call
System Forward – Off
System Forward – On
System Forward – On and Off
System Speed Dial
Switch Keymap
Transfer To Hold
Transfer To Ring
View Programmable Button Assignments

Programming Programmable Buttons

Programmable buttons provide one-button access to extensions, trunks, features, or other
resources. Each button has a Line Status Indicator that works the same way as those on the
associated telephone.
To program a programmable button:
1.
2.
After you program a programmable button, you can:
•
•
•
The following table describes the lamp signals and the indicated call activity:
Continuously Lit
Slowly flashing
Quickly flashing
Continuously flashing
You can also use Direct Station Selection/Busy Lamp Field (DSS/BLF) units to add additional
programmable buttons to your phone. Contact your system administrator for details.
Mitel ® 8662 IP Phone User Guide – Issue 13, September 2009
Feature
With the handset on-hook, dial 397.
Press the programmable button, and then enter the number to be assigned to the button.
Press the button to place a call to the assigned extension.
Press the button and then hang up to transfer a call to the assigned extension. If the call is
transferred to voice mail you hear repeating double tones.
Visually monitor the call activity of the assigned extension.
Lamp Signals
Page
Description
The extension is busy or off-hook.
The extension is in Do-Not-Disturb (DND).
The extension has a call ringing in.
The extension is causing a "Station Off-Hook" system alarm.
Personalizing Your Phone
Code New Code
9 398
49 321
21 382
21 383
49 387
31 353
31 352
31 354
22 381
16 399
29 346
29 345
15 396
Page 15