Viewing Caller Id Information; Forwarding Calls; Manual Call Forwarding - Mitel USER GUIDE 8662 User Manual

Call Features

Viewing Caller ID Information

If you are currently connected to an external caller with Caller ID, you can toggle between the
caller's name and number. If the name is unavailable, CANNOT ACCESS FEATURE appears.
To show the outside party's name/number:

Forwarding Calls

You can use Manual Call Forwarding or System Forwarding to forward calls.

Manual Call Forwarding

You can use Manual Call Forwarding to send incoming calls to another extension or external
number. The following table describes Manual Call Forwarding options.
Call Forward Feature
Call Forward All Calls
Call Forward if No
Answer
Call Forward If Busy
Call Forward If No
Answer/Busy
To use Manual Call Forwarding:
1. Press FWD and then press one of the menu buttons as described in the table above.
2. Enter the extension number, or press the OUTGOING button or the Outgoing access
To cancel a Manual Call Forwarding request:
Do one of the following:
•
•
2.
Page 30
Press (Special), and then dial 379.
All incoming calls are forwarded.
All incoming calls are forwarded if not
answered. (The timer is set by the
system administrator.)
When your phone is busy, all incoming
calls are forwarded without ringing.
All incoming calls are forwarded if your
phone is busy or if you do not answer.
ENTER FORWARD DEST appears.
code (default code is 8), and then dial the telephone number. You can press the
MESSAGE CENTER menu button to forward calls to the Message Center (voice
2
mailbox) . FWD ALL CALLS TO <number> appears.
Press the FWD button, and then press
CALL FORWARD CANCELED appears.
Or press the FWD button, and then press the FWD OFF menu button.
This feature may or may not be enabled for your system. This feature may or may not be enabled for your system.
Description
(Speaker), or lift and replace the handset. ANY
Mitel ® 8662 IP Phone User Guide – Issue 13, September 2009
Code/Menu Button
355
ALL
356
NO ANSWER
357
BUSY
358
NO ANSWER/BUSY