Table of Contents
Advertisement
Dialing Station Speed-Dial Numbers
To dial a Station Speed-Dial number:
You can also program buttons to dial Station Speed-Dial numbers. See "Assigning Speed-Dial
Entries to Programmable Buttons" on
Deleting Speed-Dial Entries
To delete a Station Speed-Dial entry:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
3. Press MUTE repeatedly until the name is erased, and then press # or the ACCEPT
4. Press MUTE repeatedly until the number is erased, and then press # or the ACCEPT
Assigning Speed-Dial Entries to Programmable Buttons
You can assign Station or System Speed-Dial numbers to your programmable buttons. Before
assigning the speed-dial number to a programmable button, make sure the number has either a
Station or System Speed-Dial code assigned to it.
To program a System/Station Speed-Dial button:
1. With the handset on-hook, dial 397. PRESS THE BUTTON TO PROGRAM appears.
2. Press the feature button that you want to use as a speed-dial button.
3. Dial 382 (Station Speed Dial) or 381 (System Speed Dial).
4. Do one of the following:
Mitel
®
8662 IP Phone User Guide – Issue 13, September 2009
Do one of the following:
•
Dial 382, and then enter the Station Speed-Dial location number (0 to 9). The
system dials the number.
•
Press
(Up) or
press # to select the location and dial the number.
•
Press
(Up) or
•
Enter the speed-dial location (0 to 9).
Press # or the ACCEPT menu button to select the location.
menu button to continue.
menu button. STN SPD BIN # <number> UPDATED appears.
•
Press
(Up) or
•
Enter the speed-dial location (0 to 9 for Station Speed-Dial or 000 to 999 or 0000 to
4999 for System Speed Dial).
(Down) to scroll through the speed-dial locations, and then
page 23
".
(Down) to scroll through the speed-dial locations.
(Down) to scroll through the speed-dial locations.
Answering and Placing Calls
Page 23
Advertisement
Table of Contents
Troubleshooting
