Using Remote Programming To Change The Password; Using Remote Programming To Change Dnd Settings - Mitel USER GUIDE 8662 User Manual

Call Features

Using Remote Programming to Change the Password

You can use Remote Programming to change the station (phone) password.
To use Remote Programming to change the station password:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 392.
6. Enter the new password followed by #.
7. Enter the new password again followed by #.

Using Remote Programming to Change DND Settings

See "Using Do-Not-Disturb" on
To use Remote Programming to turn on DND:
1. Do one of the following:
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
To use Remote Programming to turn off DND:
Page 38
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
page 43
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
text (if applicable).
Follow previous steps 1 through 4, and then dial 371.
for more information about using DND.
Mitel ® 8662 IP Phone User Guide – Issue 13, September 2009