Paging Other System Users; Placing A Page Announcement; Enabling Or Disabling The Page Feature - Mitel USER GUIDE 8662 User Manual

Paging Other System Users

You can place page announcements through phone speakers or external speakers (if
applicable). Your system may use page zones to prevent announcements from transmitting
through every phone in the system. Each page zone contains a different combination of
extensions and external paging equipment.
Contact your system administrator for page zone information. You can use the following table to
save the page zone information for future reference.

Placing a Page Announcement

To place a page announcement:
1. Press the PAGE button.
2. Enter the page-zone number (0 to 9).
3. After the tone, make your announcement, and then hang up.

Enabling or Disabling the Page Feature

You can enable or disable the Page feature for your extension. If your extension is assigned to
more than one page zone, the Page on and off feature code enables or disables your extension
for all pages zone (you cannot select individual zones).
To enable or disable paging for your phone:
Mitel ® 8662 IP Phone User Guide – Issue 13, September 2009
Page Zone Name
Dial 325 to enable paging. PAGE RECEIVE ON appears. Dial 325 again to disable
paging.
Number
Messages
Description
Page 45