Flatbed Assembly Removal; Control Panel Ribbon Cable Removal; Speaker Cable Removal - Lexmark MX610 Service Manual

Flatbed assembly removal

1
Remove the ADF assembly. See
2
Remove the scanner assembly from the MFP. See
3
Remove the control panel assembly. See
4
Remove the ADF cable. See
5
Remove the USB wireless cable. See
6
Remove the control panel USB cable. See
7
Remove the speaker cable. See
8
Remove the wireless control panel cover.

Control panel ribbon cable removal

1
Remove the left cover. See
2
Remove the scanner front cover. See
3
Remove the control panel assembly. See
4
Lift the control panel assembly, disconnect the ribbon cable (JUICC1) from the UICC card, and then feed the ribbon
cable through the wire channel.

Speaker cable removal

1
Remove the left cover. See
2
Remove the controller board shield. See
3
Remove the fan.
4
Remove the scanner front cover. See
"ADF unit removal" on page
"Scanner assembly removal" on page
"Control panel assembly removal" on page
"ADF cable removal" on page
"USB wireless cable removal" on page
"USB cable removal" on page
"Speaker cable removal" on page
"Left cover removal" on page
"Scanner front cover removal" on page
"Control panel assembly removal" on page
"Left cover removal" on page
"Controller board shield removal" on page
"Scanner front cover removal" on page
Repair information
343
333.
339.
341.
340.
343.
239.
332.
239.
332.
7016
336.
273.
273.
259.