Lexmark MX610 Service Manual page 70

Machine type 7016-630, -67x
Hide thumbs Also See for MX610:
Table of Contents

Advertisement

Error code
Description
242.11
Autocomp Pick/Lift Motor—Encoder Never Detected
in tray 2.
242.12
Motor ramp up error in tray 2.
242.13
Page to be stapled failed to feed from tray.
242.14
Sheets flushed from paper path either due to feed
error or cartridge error.
242.15
One or more trays located above the source tray 2 has
been pulled.
242.16
The engine timed out waiting for the tray 2 to report
ready before the 1st pick attempt.
242.17
Page was not properly picked from tray 2. Have not
exhausted all pick retry attempts as there are sheets
committed to the paper path from below.
242.19
Tray 2 fail to feed error. Detected while trying to pick
a sheet, and that leading edge was not detected by
tray sensor.
242.20
Took too long to ramp up dc feed motor in tray 2.
242.21
Pick motor stall in tray 2.
242.22
Tray 2 pick motor underspeed.
242.24
DC Feed autocompensator stalled on the last pick
attempt in tray 2.
242.32
Tray not ready.
242.33
Pick received but detected a tray pulled.
242.41
Motor 1 (Pick/Lift) Elevator motor stalled.
242.42
Motor 1 (Pick/Lift) Elevator motor PWM overflow
error (underspeed). Motor underspeed (max PWM
and motor underspeed, typical accordion jam).
242.43
Motor 1 (Pick/Lift) motor ramp (end ramp - did not
reach speed, typical pack feed paper jam).
242.44
Motor 2 (Separator/Passthru) motor stalled.
242.45
Motor 2 (Separator/Passthru) motor PWM overflow
error (underspeed). Motor underspeed (max PWM
and motor underspeed, typical accordion jam).
242.46
Motor 2 (Separator/Passthru) motor ramp (end ramp
- did not reach speed, typical pack feed paper jam).
242.47
Motor 3 motor stalled.
242.48
Motor 3 motor PWM overflow error (underspeed).
Motor underspeed (max PWM and motor
underspeed, typical accordion jam).
242.49
Motor 3 motor ramp (end ramp - did not reach speed,
typical pack feed paper jam).
Action
Go to
"Option tray jam service check" on page
Go to
"Option tray jam service check" on page
Go to
"Option tray jam service check" on page
Diagnostic information
70
7016
74.
74.
74.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm3150

Table of Contents