Errors - Lexmark MX610 Service Manual

959 errors

959 error messages
Error code Description
959.01 Controller verification failure of pensive boot code
959.02 Failure to authenticate Signature Verification Code
959.03 Signature Verification Code failed to authenticate a
code partition
959.04 Jump to unverified address
959.05 Unknown Boot Failure
959.20 Pensive hardware failure
959.21 Pensive did not respond to command request
959.22 Challenge Secret Failure
959.23 Pensive self test failed during initialization
959.24 EEPROM Retention Error (Write failure)
959.25 Insufficient device space during HW prog
959.26 Incremental counter reset exceeds maximum value
959.27 Increment count failed due to max value limit
959.28 Invalid SP Memory Configuration
959.30 Pensive library flagged an invalid argument(s)
959.31 Pensive library flagged an invalid device address
959.32 Failure to init physical interface
959.33 Unknown/unexpected Error
959.34 System Pensive Bus Busy Error
959.35 Transmission Error
959.36 Pensive command is invalid due to unlocked device
status
959.37 Pensive command is invalid due to locked device status
959.38 Incremental counter id(s) are invalid
959.39 Invalid NV address
959.40 Invalid Pensive command
Action
Go to "Invalid firmware/controller board service
check" on page
Go to "Invalid firmware/controller board service
check" on page
Diagnostic information
137
138.
138.
7016