Tamper Sub-Assembly Removal - Lexmark MX610 Service Manual

9
Remove the five screws (A), and then remove the tamper main assembly.

Tamper sub-assembly removal

1
Remove the stapler right cover. See
2
Remove the stapler left cover. See
3
Remove the stapler rear cover. See
4
Remove the stapler service cover. See
5
Remove the stapler controller card. See
6
Remove the stapler cooling fan. See
7
Remove the stapler power supply unit. See
8
Remove the stapler top cover. See
9
Remove the tamper main assembly. See
"Stapler right cover removal" on page
"Stapler left cover removal" on page
"Stapler rear cover removal" on page
"Stapler service cover removal" on page
"Stapler controller card removal" on page
"Stapler cooling fan removal" on page
"Stapler power supply unit removal" on page
"Stapler top cover removal" on page
"Tamper main assembly removal" on page
Repair information
387
355.
356.
364.
368.
368.
372.
372.
376.
386.
7016