Chapter 2 - Getting Started; Out Of The Box; Initial Setup For Dolphin 6110 Terminals - Honeywell Dolphin 6110 User Manual

With windows ce 6.0

Hide thumbs Also See for Dolphin 6110:

Table of Contents

Getting Started

Verify that your carton contains the following items:

• Dolphin 6110 mobile computer (the terminal)

• Battery pack (3.7v, Li-Ion)

• AC Level V power supply/Communication Cable

(KSAS0100500200D5); Input: 100-240V AC, 50/60Hz 0.4

Amps; Output: 5 Volts DC, 2.0 A

• Level VI power supply/Communication Cable (KSAS0120500200D5)

• Localized plug adapters

Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see

Customer Support

on page

11-1.

Step 1. Install the Battery

The Dolphin 6110 is shipped with the battery packaged separate from the unit. Follow the steps below to

install the battery.

1. Release the strap making it convenient to reach the cover.

2. Remove the battery compartment cover by turning the cover locks upward and removing the cover.

3. Insert the battery into the battery well with the labels facing upward.

4. Replace the cover with a hinging motion and turn the locks downwards.

Cover Locks

Battery

Note: The battery door must be installed prior to booting the unit.

5. Replace the hand strap.

2‐1

Table of Contents