Table of Contents
Advertisement
Bottom Page Only
Scans the bottom page only in page order. You can select this option when [Top Page
then Bottom] is selected.
Binding Edge Erase
Erases the shadow from the center section of the document. You can specify the
binding erase width in the range from 0 to 50 mm in 1 mm increments.
Original Size (Specifying a Scan Size)
This feature allows you to set the scan size for a document.
Use this feature when a document is a non-standard size, or when you want to scan a
document at a size different from the original size. You can also add margins, or delete
unnecessary margins using this feature.
1
Select [Original Size].
2
Select any option.
When you select a non-standard size,
specify values for the X and Y directions.
Auto Detect
Detects the document size automatically. The following table shows the document
sizes that can be detected automatically.
Auto-detectable
Document Sizes
Note
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the
System Administration mode. For information on [Paper Size Settings], refer to "5 Tools" > "Common
Service Settings" > "Other Settings" > "Paper Size Settings" in the Administrator Guide.
Standard Size
Allows you to select from preset sizes.
Document feeder
B5, B5 , B4, A5, A5 , A4, A4 ,
A3, 8.5 x 11", 8.5 x 11" ,
11 x 17", 16K , 8K
• If the document size cannot be detected automatically, a screen to enter the document size
appears.
Layout Adjustment
Document glass
B6, B6 , B5, B5 , B4, A6, A5,
A5 , A4, A4 , A3, 8.5 x 11" ,
16K, 16K , 8K
4
165
Advertisement
Table of Contents
